Ermenrich Ping MK30 Digital Clamp Meter

Functions: voltmeter, ammeter, ohmmeter, capacitance meter, frequency meter, duty cycle meter, thermocouple, continuity test, diode test, NCV, phase detector

This tool features Schmieroll lubrication technology.


Find out more

---

The Ermenrich Ping MK30 digital clamp meter combines 7 measuring functions and allows for the comprehensive diagnostics of electrical networks and electrical equipment. The device independently selects the measurement limit for each operating mode, and it displays readings on the built-in screen in the form of numbers and values on a graphic scale. The presence of the Smart function greatly simplifies the use of the device: The device measures voltage, resistance, and circuit continuity in a fully automatic mode.

Its small size enables you to use the device in hard-to-access places, the contrast backlit screen is clearly visible in the dark, and the Data Hold function makes it possible to “freeze” readings on the screen until they are convenient to read. The device uses the True RMS method, in which calculations of variable quantities are carried out using the true root mean square value, and so the measured value will be as accurate as possible.

Clamps measure alternating current without breaking the circuit, other measured parameters are resistance, direct and alternating voltage, capacitance, frequency, duty cycle, and temperature. The device also operates in diode testing and continuity mode, and it can work as a phase detector and hazardous voltage detector (NCV).

The Ermenrich Ping MK30 digital clamp meter is battery-powered, equipped with an auto-off function, and notifies you of the need to replace the batteries if they are running low.

Key features:

• 7 measuring functions in one instrument: voltmeter, ammeter, ohmmeter, capacitance meter, frequency meter, duty cycle meter, thermocouple sensor


• Highly accurate True RMS measurements


• Continuity Test – short circuits and open circuits detection


• Diode test, phase detector, live cable detection, and hidden wiring detection (NCV)


• “Smart” measurements in the modes of continuity and determination of voltage and resistance – the device does everything automatically


• Data Hold function, saves the minimums and maximums


• Operates on standard batteries

The kit includes:

• Clamp meter


• Probes


• Pouch


• User manual and warranty card

Brand	Ermenrich
Warranty	5 years
EAN	5905555027371
Package size (LxWxH)	23x12x5 cm
Shipping Weight	0.485 kg
Selection of the measuring limit	automatic
Basic functions	ammeter, capacitance meter, duty cycle meter, frequency meter, ohmmeter, thermocouple, voltmeter
DC voltage measuring limit	600mV/ 6V/ 60V/ 600V: error ±(0.5%+5)
AC voltage measuring limit	600mV/6V/60V/600V: error ±(0.8%+5)
AC current measuring limit	60/600A: error ± (2.5%+5)
Capacity measuring limit	6nF/ 60nF/ 600nF/ 6μF/ 60μF/ 600μF/ 6mF/ 60mF: error ±(4.0%+5)
Frequency measurement limits	100Hz/ 1000Hz/ 10kHz/ 100kHz/ 1MHz/ 10MHz: error ±(1.0%+3)
Duty cycle measurement range	1–99%: error ±(3.0%+3)
Wire mapping	yes
Continuity test	+, combined with resistance measurement mode (600Ω)
Diodes test	yes
Non-contact voltage detection (NCV)	yes
True RMS	yes
Hold function	yes
Limit value function (Min/Max)	yes
Automatic recognition function (Smart)	+ (only for DC and AC voltage, resistance and continuity)
Phase detector (Live)	yes
Overvoltage category	CAT III 600V
Display counts	6000
Display backlight	yes
Graphic scale	yes
Flash light	yes
Safety standards	EN61010-1,-2-030; EN61010-2-033; EN61326-1
Operating temperature range, °C	-40 — 1000
Power supply	3 AAA batteries (not included)
Low battery status indicator	yes
Auto power off	yes