TECH-PROTECT GLASS FIT+ 2-PACK LENOVO IDEA TAB 11.0 TB-336 CLEAR

Frezowane krawędzie 2.5D – Komfort i berøringen

Det hærdede glas er udstyret med fræsede 2.5D-kanter, som ikke kun giver det et elegant udseende, men også sikrer en behagelig fornemmelse ved berøring. Det gør brugen af din tablet endnu mere komfortabel.

Installationssæt – Nem montering af glasset

I sættet finder du også en monteringsvejledning og nødvendige tilbehør, der gør det lettere at påføre glasset. Det anbefales at udføre monteringen på badeværelset efter et bad for at minimere støv i luften, hvilket sikrer perfekt vedhæftning af glasset til skærmen.

Tekniske specifikationer for Tech-Protect Glass Fit+ hærdet glas

Passer til model: Lenovo Idea Tab 11, Lenovo Tab K11 gen. 2

Producent: Tech-Protect

Type: Glas

Variant: Original

Produktets vægt med emballage: 0,250 kg

EAN (GTIN): 5906302331918

Producentkode: 5906302331918

Hårdhed: 9H

Tykkelse: 0.3 mm

Fræsede kanter: 2.5D

Ekstra lag: Oleofobisk

Gennemsigtighed: Krystal klar

Påvirker ikke touch-funktionalitet: Ja

Sættet indeholder: 2 x Tech-Protect Glass Fit+, 2 x installationssæt

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass, only 0.3mm thick.

The perfectly fitted design fully preserves the touchscreen's sensitivity. The manufacturer rates its hardness at 9H on a 10-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is crystal clear, preserving natural colors and display sharpness. An additional advantage is a special oleophobic coating that effectively minimizes the accumulation of fingerprints and other contaminants on the glass surface, making it easier to keep clean.

* Due to the various milling patterns on display edges, a slight air halo may appear around the screen after installing a screen protector! This is a natural occurrence and depends on the milling pattern of the screen in a given unit.

INSTALLATION INSTRUCTIONS:
1) Start the installation in the bathroom right after taking a bath - the water vapor will absorb all the dust from the atmosphere and it will not interfere with the installation.
2) Thoroughly clean and degrease the screen surface, then polish it to a shine with a dry cloth.
3) Install the cover as evenly as you can - you can position it using two leaves, sticking them to the side of the device.
4) Eliminate any air bubbles by pressing firmly in circular motions for several dozen seconds. Do this to ensure the adhesive bonds as strongly as possible to the screen.

PRODUCT FEATURES:
- 100% Original
- Packed in original packaging
- Hardness 9H
- Cut to fit the flat part of the display
- 2.5D milled edges pleasant to the touch
- Additional oleophobic layer
- Perfect clarity
- Does not affect touch functionality
- Dimensions: 250 x 162 mm

THE SET INCLUDES:
2 x Tech-Protect Glass Fit+
2 x Installation kit