Ermenrich Seek VE80 Industrial Endoscope

The Ermenrich Seek VE80 Industrial Endoscope is a multifunctional professional tool featuring a rotating camera with a 90° view and a small diameter of only 6.2mm. The borescope is used to monitor the quality of repair and construction work, check the general condition of premises, and search for sources of dampness, mold, and freezing. Thanks to the flexible and thin probe, the user can easily examine any hard-to-reach cavity or utility (electrical wiring, pipes, shaft, etc.) within a wall. Cable length: 3 meters. For operation in complete darkness, the endoscope is equipped with a backlight consisting of six bright LEDs located around the camera lens.

The probe camera is rotatable – it can be turned right or left by turning the wheel on the endoscope handle. The rotation angle is 210°. Image formation in the Ermenrich Seek VE80 is achieved using an OmniVision CMOS matrix, featuring high resolution, low noise levels, and natural color reproduction. The image is displayed on a 4.3" IPS screen. One of the main features of the device is the built-in recorder. It supports photo and video recording with a resolution of 1920x1080px, 1280x720px, or 640x480px. The device supports TF memory cards up to 32GB, which can be used for the long-term storage of captured media. Photos and videos can be easily transferred to a PC via a TF card reader or USB Type-C cable.

The Ermenrich Seek VE80 industrial endoscope is powered by a built-in 2600mAh, 3.7V battery, which is charged using a USB Type-C cable and a 5V power adapter. To save power, the device has an automatic shutdown function after 3, 5, or 10 minutes of inactivity (optional). It also features a low battery indicator. The endoscope operates for at least 3 hours without interruption on a fully charged battery.

The Ermenrich Seek VE80 body is made of high-strength engineering grade ABS plastic. The camera lens and LEDs have a high degree of sealing against water and dust – IP67 (the device itself is not protected against water and dust). A wide range of operating temperatures from −10 to +50°C allows the tool to be used in most situations involving residential premises and enterprises. The temperature sensor built into the probe prevents accidental damage to electronic components due to operation in extreme temperatures. It switches the camera off when the temperature becomes too high (90°C) for the safe operation of the device.

Key features:

• 210° rotating camera with 90° viewing angle


• High maximum resolution of photos and videos: 1920x1080px


• 4.3" IPS color screen with natural color rendering and clear image


• The built-in battery fully charges in 4 hours


• Low battery indicator, auto-off function, and temperature sensor


• OmniVision low-noise color CMOS sensor


• TF card support up to 32GB


• Cyclical digital zoom: 1x/1.5x/2x steps

The kit includes:

• Endoscope


• USB Type-C cable


• Cleaning wipes


• Carry bag


• User manual and warranty card