EUR 0,00
(Delivery cost: 0,00)
Marimex Aquamar Spa well 0.6 l
Item no.: [25669140] | Manufacturer: Marimex | Model no.: 11313121 | EAN: 8590517992582
The product does not have an image - the illustration shows the product category
Remote stock (3-5 days)
The item is in a remote warehouse, delivery time is 3-5 business days. More info
Delivery options - Select at checkout
Shipping @price - GLS
12,00
EUR
6,78
Incl. VAT 8,48
Total incl. delivery
23,48
Add to list
The function requires that you are logged in. Create a user and use our smart list system to keep track of future purchases, regular purchases or wish lists.
Send på mail
Preparation for stabilization of well water with high mineral content. The product prevents the formation of mineral deposits on the walls and bottom of the whirlpool. It is particularly suitable for stabilizing problem minerals such as iron, copper, manganese and calcium. The active substance binds to the problem minerals and thus prevents their undesirable effects, such as possible brown colouring of the water due to oxidation of iron ions after chlorination of untreated well water. If the whirlpool is filled with hard or otherwise mineralised water (usually well water), mineral deposits are formed. These deposits are easily covered with various impurities, which then form a breeding ground for bacteria and algae.
Usage:
Apply the product to the free water surface while the filtration is running. To ensure the correct effect of the product, use the clarifiers no sooner than 24 hours after adding the Well Mineral. This is because the simultaneous use of these products reduces the effectiveness.
Dosage:
For optimum effect, the pH of the water should first be adjusted to approx. 6.8-7.2. The product works best when added to freshly filled water, before it is first chlorinated. The first chlorination is recommended at the earliest 24 hours after the application of Studna Mineral. The initial dose is 25 ml per 1 m3 of water in the whirlpool. If you know that the source water for your whirlpool is very hard or contains elevated levels of problem minerals (iron, manganese, etc.), increase the initial dose up to 75 ml per 1 m3 of pool water. Always add 30 ml / 1 m3 of water when refilling fresh water with the filtration on. For whirlpools, a water hardness of 160-240 mg/l in the form of CaCO3 is most suitable.
Caution:
Do not mix with other chemicals in concentrated state. May only be used for water treatment in whirlpools. The product is not intended for the treatment of water in wells! The manufacturer is not liable for damage caused by improper use of the product.
Usage:
Apply the product to the free water surface while the filtration is running. To ensure the correct effect of the product, use the clarifiers no sooner than 24 hours after adding the Well Mineral. This is because the simultaneous use of these products reduces the effectiveness.
Dosage:
For optimum effect, the pH of the water should first be adjusted to approx. 6.8-7.2. The product works best when added to freshly filled water, before it is first chlorinated. The first chlorination is recommended at the earliest 24 hours after the application of Studna Mineral. The initial dose is 25 ml per 1 m3 of water in the whirlpool. If you know that the source water for your whirlpool is very hard or contains elevated levels of problem minerals (iron, manganese, etc.), increase the initial dose up to 75 ml per 1 m3 of pool water. Always add 30 ml / 1 m3 of water when refilling fresh water with the filtration on. For whirlpools, a water hardness of 160-240 mg/l in the form of CaCO3 is most suitable.
Caution:
Do not mix with other chemicals in concentrated state. May only be used for water treatment in whirlpools. The product is not intended for the treatment of water in wells! The manufacturer is not liable for damage caused by improper use of the product.