EUR 0,00
(Delivery cost: 0,00)
WiFiHW 2.5GPOE 2.5Gbps PoE injector
Item no.: [25971055] | Manufacturer: SOL | Model no.: 2.5GPOE
The product does not have an image - the illustration shows the product category
out of stock
The item is not in stock. More info
Udsolgt
Varen er ikke på lager.
Brug funktionen ”Giv mig besked..." herunder for opdateringer.
Delivery options - Select at checkout
Shipping @price - GLS
12,00
EUR
30,39
Incl. VAT 37,99
Total incl. delivery
52,99
Notify me when the item is in stock again
Add to list
The function requires that you are logged in. Create a user and use our smart list system to keep track of future purchases, regular purchases or wish lists.
Send på mail
802.3af/at/bt PoE injector with support for 10/100/1000/2500 Mbps speeds for powering active elements with integrated PoE extractor over Ethernet cable.
The injector is suitable for a wide range of network elements (access points, IP cameras, VoIP, modems, etc.).
Functions and features:
- An economical alternative to upgrade your network to IEEE 802.3at PoE+ or 802.3bt PoE++.
- Active PoE standard negotiation protects connected devices
- 2.5Gbps data transfer capacity
- PoE port with a maximum output of 90W
- Support for a wide range of IEEE 802.3at/bt (PoE+/PoE++) enabled devices
- Wall or DIN rail mounting flexibility for a variety of installation environments
- groove on the injector body for fixing multiple pieces into one block
Technical Specifications:
- Interface: 1x shielded RJ-45 LAN connector, 1x shielded RJ-45 LAN+POE connector.
- All 4 data pairs active for gigabit data rates
- Injector dimensions: 43 mm x 73 mm x 42 mm
- 90 watts delivered up to 100m with 56V power supply
- PoE operation in 4 pairs (Type 4 per 802.3bt)
- PoE operation in 2 pairs (Type 3 per 802.3at/af)
- Power jack input: 2.1 mm x 5.5 mm
- Wago terminal block (5.0mm for awg 16-20 wires)
- Output voltage corresponds to input voltage
- Passive cooling (quiet fanless operation)
Environmental characteristics:
Operating temperature range: 0 to 50 °C
Storage temperature range 0 to 50 °C
Relative humidity range - 5 to 90% non-condensing
The equipment is PELV according to NFPA 79
Installation:
The unit can be installed on a wall or DIN rail using the supplied DIN clip on the injector body.
The injector is suitable for a wide range of network elements (access points, IP cameras, VoIP, modems, etc.).
Functions and features:
- An economical alternative to upgrade your network to IEEE 802.3at PoE+ or 802.3bt PoE++.
- Active PoE standard negotiation protects connected devices
- 2.5Gbps data transfer capacity
- PoE port with a maximum output of 90W
- Support for a wide range of IEEE 802.3at/bt (PoE+/PoE++) enabled devices
- Wall or DIN rail mounting flexibility for a variety of installation environments
- groove on the injector body for fixing multiple pieces into one block
Technical Specifications:
- Interface: 1x shielded RJ-45 LAN connector, 1x shielded RJ-45 LAN+POE connector.
- All 4 data pairs active for gigabit data rates
- Injector dimensions: 43 mm x 73 mm x 42 mm
- 90 watts delivered up to 100m with 56V power supply
- PoE operation in 4 pairs (Type 4 per 802.3bt)
- PoE operation in 2 pairs (Type 3 per 802.3at/af)
- Power jack input: 2.1 mm x 5.5 mm
- Wago terminal block (5.0mm for awg 16-20 wires)
- Output voltage corresponds to input voltage
- Passive cooling (quiet fanless operation)
Environmental characteristics:
Operating temperature range: 0 to 50 °C
Storage temperature range 0 to 50 °C
Relative humidity range - 5 to 90% non-condensing
The equipment is PELV according to NFPA 79
Installation:
The unit can be installed on a wall or DIN rail using the supplied DIN clip on the injector body.