Flex GE 5 R + TB-L, Disc sander, Black, Grey, Red, 1110 RPM, 1650 RPM, AC, 500 W

Very handy, light-weight machine with optimum ease of operation. Provides comfortable and ergonomic working conditions

Revolving edge segment enables the processing of wall/wall and wall/ ceiling surface transitions

The edge segment rotates by the movement of the machine without any interruption in work

Easy guiding: by optimal balance between motor and sanding head

Reliable force transmission and high flexibility thanks to the flexible drive shaft from. For decades established “FLEX technology”. Thanks to this design principle the weight on the head of the Giraffe is reduced to a minimum. This facilitates handling.

Electronic: controlled constant speed, soft-start, overload protection and speed selection with adjuster wheel

Effective dust extraction from between the brush ring and the sanding pad prevents clogging of the abrasive and promotes a dust-free working environment

Option of connecting the FLEX safety vacuum cleaners to the FLEX clip-system on the guide tube

Easy handling thanks to ergonomically shaped guide tube made of aluminium. Optionally an auxiliary handle (accessory) can be attached

Dust-proof on/off switch

Very flexible thanks to an optional 500 mm extension (accessory) for high rooms, can be attached without any tools

According to the assortment of sanding paper ideally suited for sanding plaster boards, solid styropor insulation slabs, preparation for painting, polishing

The innovative, textile transport system allows the machine and accessories to be transported effortlessly. The Giraffe® does not have to be mounted and is immediately ready for use

Very large areas and rooms up to 3.40 m in height can be processed thanks to the optional application of the GM 340

Gimbal-mounted sanding head provides high flexibility and optimum adjustment for sanding walls and ceilings.