Intact GL10 Battery-Guard - 12 V battery monitoring - Bluetooth® connection - app compatible - charge monitoring - 15 mm x 60 mm x 45 mm

Thanks to intAct Battery Guard with the free app for Apple or Android, you are now able to quickly and easily check the state of charge. The permanent full charge status prevents possible premature damage or battery failure. After connecting with the loop and downloading from the Android or Apple app, you can view the current voltage value. The transmitter is suitable for 6V, 12V and 24V batteries. The range is approximately 6 meters. The four-color, tachometer-like display shows the state of charge in dark green (fully charged), light green (partially charged), orange (discharged) and red (fully discharged). The voltage value is also displayed in numbers and letters. If the value is low or minimum, an early recharge of the battery will be recommended.

Up to five batteries can be monitored for voltage values using the app, of course intAct Battery Guard must be installed on each battery.

Special features
- Wireless via Bluetooth
- Battery monitoring via smartphone
- Free app available
- Charging recommendations available

Characteristics
- IP65 sealed case
- Compact design with cable lugs
- Wireless via Bluetooth
- Check battery status via smartphone
- Free app for Android or Apple
- Recommendation to recharge the battery when the minimum voltage value is exceeded
- Can monitor up to 5 car batteries at the same time
- Can monitor 6, 12 and 24 volt batteries
- Easy attachment with eyelet
- Current consumption of only approx. 2 mW
- Over-polarity will not cause any damage to the device or the battery
- Free app in the App Store or Google Play Store under "intact battery guard".

System requirements
Android or Apple smartphone/tablet
Bluetooth 4.0 - Android 4.3 (from original Android 4.3) - IOS 5.0 (iPhone 4S from original iOS 5.0)