SOLARIX SX9-2-6-UTP-WH Solarix outlet CAT6 UTP 2 x RJ45 flush-mounted white

Reliable socket Solarix - CAT6, unscreened. CAT6 places higher demands on structured cabling components than CAT5E. SX9 sockets, which belong to the Solarix - CAT6 product group, meet all these demanding requirements defined in the standards for structured cabling without any problems. The SX9 sockets are German style and are equipped with two RJ45 ports with a 45° inclination. The IDC terminal block of the Krone type can accommodate wires of AWG 26 - 22. The contacts are marked on the terminal block with a colour scheme according to the wiring type, either according to the T568A or T568B standard. The SX9 sockets are designed to provide maximum performance, long life, reliability, while allowing for easy installation. The sockets are available in both unshielded and shielded versions and are designed to be installed flush or in floor boxes. When using the SX9-0-WH box, this type of socket can also be used for installation on plaster. The colour of both the socket and the box is white.

Category.
Highest supported protocol [?] : 1000BaseT, 1000BaseTX
The highest theoretical speed that can be achieved on a component
Number of ports [?] : 2
Number of RJ45 ports
Shielding [?] : no
Shielding type
Designation [?] : flush-mounted, with plaster box
Plasterboard or flush-mounted
Port angle : 45°
Modular design: no
Min. port lifetime [?] : 1000 connections/disconnections
RJ45 port lifetime - i.e. number of cycles of patch cable connection and disconnection
Contact protection [?] : 50 µ gold and 100 µ nickel
RJ45 connector contact material and quantity
Terminal block [?] : Krone 8p8c
Type of terminal block used to cut the installation cable conductor
Min. lifetime of terminal block [?] : 200 cuts
Terminal block lifetime - i.e. number of installation cable cutting cycles
Trimming blades [?] : Bronze, P, Sn and Pb alloy
Material of the notching knives on the terminal block
Wire size [?] : AWG 26 - 22
Recommended conductor diameter of the installation cable for the component terminal block
Material of non-metallic parts [?] : FR plastic according to UL94-0
Type of plastic materials on the component
Color: White
Dimensions: 80 x 80 mm
Storage temperature: -40 to 70°C
Operating temperature: -10 to 60°C
Max. operating humidity: 93%